
-
74LVC126APW-Q100J
- For Product Pricing Customization Or Other Inquiries
- Contact Now
- Technical Documents
- Download Datasheet
Request Information For 74LVC126APW-Q100J












74LVC126APW-Q100J Overview
The 74LVC126A-Q100 is a quad buffer/line driver with 3-state outputs controlled by the output enable inputs (nOE). A LOW on nOE causes the outputs to assume a high impedance OFF-state. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in mixed 3.3 V and 5 V environments.
Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times.
This device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output, preventing the potentially damaging backflow current through the device when it is powered down.
This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.
Features
- Automotive product qualification in accordance with AEC-Q100 (Grade 1)
- Specified from -40 °C to +85 °C and from -40 °C to +125 °C
- Specified from -40 °C to +85 °C and from -40 °C to +125 °C
- 5 V tolerant inputs/outputs for interfacing with 5 V logic
- Wide supply voltage range from 1.2 V to 3.6 V
- CMOS low power consumption
- Direct interface with TTL levels
- Complies with JEDEC standard:
- JESD8-7A (1.65 V to 1.95 V)
- JESD8-5A (2.3 V to 2.7 V)
- JESD8-C/JESD36 (2.7 V to 3.6 V)
- JESD8-7A (1.65 V to 1.95 V)
- JESD8-5A (2.3 V to 2.7 V)
- JESD8-C/JESD36 (2.7 V to 3.6 V)
- ESD protection:
- MIL-STD-883, method 3015 exceeds 2000 V
- HBM JESD22-A114F exceeds 2000 V
- MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)
- MIL-STD-883, method 3015 exceeds 2000 V
- HBM JESD22-A114F exceeds 2000 V
- MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)
- DHVQFN package with Side-Wettable Flanks enabling Automatic Optical Inspection (AOI) of solder joints
Product Parameters
-
id
http://www.data.nexperia.com/id/plm/salesItem/935304345118
-
name
74LVC126APW-Q100J
-
packingQuantity
2,500
-
nc12
935304345118
-
packingDescription
Reel 13" Q1/T1
Technical Documents
Other distributor's price
Distributor | Part # | Mfg. | Description | Price |
---|---|---|---|---|
![]() |
74LVC126APW-Q100J | Nexperia | IC BUF NON-INVERT 3.6V 14TSSOP |
1---$0.4600 |
![]() |
74LVC126APW-Q100J | Nexperia |
5000---$0.1171 |
|
![]() |
74LVC126APW-Q100J | Nexperia | Buffers & Line Drivers 74LVC126APW-Q100/SOT402/TSSOP1 |
1---$0.4900 10---$0.4200 100---$0.3130 500---$0.2460 1000---$0.1900 2500---$0.1730 5000---$0.1610 10000---$0.1520 25000---$0.1470 |
![]() |
74LVC126APW-Q100J | Nexperia | Ic, Bilateral Switch Rohs Compliant: Yes |Nexperia 74LVC126APW-Q100J |
2500---$0.1670 |
![]() |
74LVC126APW-Q100J | Nexperia | Buffer/Line Driver 4-CH Non-Inverting 3-ST CMOS 14-Pin TSSOP T/R - Tape and Reel (Alt: 74LVC126APW-Q100J) |
7500---$0.2100 12500---$0.2043 20000---$0.1987 37500---$0.1930 75000---$0.1873 375000---$0.1816 750000---$0.1760 |
Associated Products
-
NZ9F4V3ST5G
Onsemi
Automotive voltage monitor with watchdog timer
-
PCF8578T/1,118
NXP
Automotive voltage monitor with watchdog timer
-
BU931P
ST
Automotive voltage monitor with watchdog timer
-
BU941ZPFI
ST
Automotive voltage monitor with watchdog timer
-
BU931T
ST
Automotive voltage monitor with watchdog timer
-
ESDAXLC6-1BT2
ST
Automotive voltage monitor with watchdog timer
Blogs
- How to Reset a Mass Air Flow Sensor
- How to Reset a Nox Sensor
- How to Test an IGBT Using A Multimeter
- How to Test Crankshaft Sensor with Multimeter
- How to Delete O2 Sensors from ECM
- IGBT Symbol Diagram, Characteristics, Circuit
- Difference Between BJT, MOSFET and IGBT: BJT vs MOSFET vs IGBT
- ESP32 vs. STM32
- How to Reset a Coolant Temperature Sensor
- Throttle Position Sensor Diagram