
-
74LVCH16244ADGG-QJ
- For Product Pricing Customization Or Other Inquiries
- Contact Now
- Technical Documents
- Download Datasheet
Request Information For 74LVCH16244ADGG-QJ












74LVCH16244ADGG-QJ Overview
The 74LVC16244A-Q100; 74LVCH16244A-Q100 is a 16-bit buffer/line driver with 3-state outputs. The device can be used as four 4-bit buffers, two 8-bit buffers or one 16-bit buffer. The device features four output enables (1OE, 2OE, 3OE and 4OE), each controlling four of the 3-state outputs. A HIGH on nOE causes the outputs to assume a high-impedance OFF-state. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in mixed 3.3 V and 5 V environments. Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times. This device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output, preventing the potentially damaging backflow current through the device when it is powered down.
The 74LVCH16244A-Q100 bus hold on data inputs eliminates the need for external pull-up resistors to hold unused inputs.
This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.
Features
- Automotive product qualification in accordance with AEC-Q100 (Grade 1)
- Specified from -40 °C to +85 °C and from -40 °C to +125 °C
- Specified from -40 °C to +85 °C and from -40 °C to +125 °C
- Wide supply voltage range from 1.2 V to 3.6 V
- 5 V tolerant inputs/outputs for interfacing with 5 V logic
- I
- OFF
- CMOS low power consumption
- Multibyte flow-through standard pin-out architecture
- Low inductance multiple power and ground pins for minimum noise and ground bounce
- Direct interface with TTL levels
- High-impedance when V
- CC
- All data inputs have bus hold. (74LVCH16244A-Q100 only)
- Complies with JEDEC standard:
- JESD8-7A (1.65 V to 1.95 V)
- JESD8-5A (2.3 V to 2.7 V)
- JESD8-C/JESD36 (2.7 V to 3.6 V)
- JESD8-7A (1.65 V to 1.95 V)
- JESD8-5A (2.3 V to 2.7 V)
- JESD8-C/JESD36 (2.7 V to 3.6 V)
- ESD protection:
- MIL-STD-883, method 3015 exceeds 2000 V
- HBM JESD22-A114F exceeds 2000 V
- MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)
- CDM ANSI/ESDA/Jedec JS-002 exceeds 1000 V
- MIL-STD-883, method 3015 exceeds 2000 V
- HBM JESD22-A114F exceeds 2000 V
- MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)
- CDM ANSI/ESDA/Jedec JS-002 exceeds 1000 V
Product Parameters
-
id
http://www.data.nexperia.com/id/plm/salesItem/935302894118
-
name
74LVCH16244ADGG-QJ
-
packingQuantity
2,000
-
nc12
935302894118
-
packingDescription
Reel 13" Q1/T1
Technical Documents
Other distributor's price
Distributor | Part # | Mfg. | Description | Price |
---|---|---|---|---|
![]() |
74LVCH16244ADGG-QJ | Nexperia | IC BUF NON-INVERT 3.6V 48TSSOP |
2000---$0.9607 |
![]() |
74LVCH16244ADGG-QJ | Nexperia | Buffers & Line Drivers 74LVCH16244ADGG-Q100/SOT362/TS |
1---$2.0000 10---$1.8000 25---$1.7000 100---$1.4500 250---$1.3600 500---$1.1900 1000---$0.9930 2000---$0.9920 |
![]() |
74LVCH16244ADGG-QJ | Nexperia |
2000---$0.7120 |
|
![]() |
74LVCH16244ADGG-QJ | Nexperia | Ic, Quad Buffer Rohs Compliant: Yes |Nexperia 74LVCH16244ADGG-QJ |
2000---$1.0200 |
![]() |
74LVCH16244ADGG-QJ | Nexperia | Buffer/Line Driver 16-CH Non-Inverting 3-ST CMOS/LVTTL 48-Pin TSSOP T/R - Tape and Reel (Alt: 74LVCH16244ADGG-QJ) |
2000---$1.0687 4000---$1.0398 8000---$1.0109 12000---$0.9821 16000---$0.9532 20000---$0.9243 200000---$0.8954 |
Associated Products
-
NZ9F4V3ST5G
Onsemi
Automotive voltage monitor with watchdog timer
-
74HC1G04GV-Q100H
Nexperia
Automotive voltage monitor with watchdog timer
-
PCF8578T/1,118
NXP
Automotive voltage monitor with watchdog timer
-
BU931P
ST
Automotive voltage monitor with watchdog timer
-
AUIRFR4620
infineon
Automotive voltage monitor with watchdog timer
-
SCT3017ALHRC11
Rohm
Automotive voltage monitor with watchdog timer
Blogs
- How to Reset a Mass Air Flow Sensor
- How to Test an IGBT Using A Multimeter
- How to Reset a Nox Sensor
- How to Test Crankshaft Sensor with Multimeter
- How to Delete O2 Sensors from ECM
- ESP32 vs. STM32
- Difference Between BJT, MOSFET and IGBT: BJT vs MOSFET vs IGBT
- IGBT Symbol Diagram, Characteristics, Circuit
- How to Reset a Coolant Temperature Sensor
- CMOS vs BSI Sensor