
-
ATA6570-GNQW1
- For Product Pricing Customization Or Other Inquiries
- Contact Now
- Technical Documents
- Download Datasheet
Request Information For ATA6570-GNQW1












ATA6570-GNQW1 Overview
The ATA6570 is a CAN Partial Networking (PN)transceiver that interfaces a Controller Area Network (CAN) protocol controller and the physical two wire CAN bus designed for high speed CAN applications in the automotive environment. It provides local and enhanced remote wake-up capabilities.The Microchip ATA6570 has a very low power consumption in Standby and Sleep Mode. Beside local wake-up via WAKE and remote wake-up pattern according to ISO 11898-2: 2016 and also additionally supports ISO11898-2: 2016 compliant CAN partial networking. A CAN frame decoder evaluates the bus traffic and checks for a matching frame, that has being configured into registers via the SPI. The device is able to keep the complete ECU in a low power mode even when bus traffic is present until a valid wake-up frame is received. It also features a watchdog, a Serial Peripheral Interface (SPI) and automatic adjustment of the I/O levels to the I/O level of the connected microcontroller via the VIO pin.The Microchip ATA6570 is a CAN-FD device and can be easily configured via the SPI as Non-FD (meaning only for Classical CAN), CAN FD silent, CAN FD passive or as CAN FD active device, in order to fulfill the corresponding application requirements.
To purchase the ATA6570 or obtain additional information, please contact any Microchip sales representative or authorized worldwide distributor.
Please see our MikroElektronika click Board! https://www.mikroe.com/ata6570-clickFeatures
- High speed CAN PN transceiver Fully ISO 11898-2, ISO 11898-5, ISO 11898-2: 2016 and SAE J2962-2 compliant
- Autonomous bus biasing according to ISO 11898-6
- Low electromagnetic emission (EME) and high electromagnetic immunity (EMI)
- Standard CAN data rate up to 1Mbit/s and CAN FD data rate up to 5Mbit/s (CAN FD)
- 4Mbit/s SPI interface
- Differential bus receiver with wide common mode range
- Very low current consumption in Sleep and Standby with fully wake-up capability
- Power-down of the complete node via the INH-output (switching off external voltage regulator(s))
- Power off mode
- Microcontroller Reset mode
- Sleep mode
- Standby mode
- Normal mode
- Overtemp mode
- Local wake-up via pin WAKE
- Remote wake-up pattern according to ISO 11898-5
- Remote wake-up frame according to ISO 11898-6 (selective wake-up)
- Host wake-up via SPI
- Wake-up source recognition
- 3.3V to 5V microcontrollers can be interfaced directly via the VIO pin
- Battery supply and CAN bus pins protected against transients according to ISO7637
- High Electro Static Discharge (ESD) Handling Capability on the Bus Pins
- Bus pins short-circuit protected to GND and VCC
- VS operating voltage up to 28V, VS DC supply voltage up to 42V
- Watchdog with independent clock source
- Optional cyclic wake-up in watchdog Timeout mode
- Watchdog automatically re-enabled when wake-up event captured
- Watchdog period selectable
- Watchdog reset period selectable
- Qualified according to AEC-Q100
- Fulfills the OEM Hardware Requirements for CAN Interfaces in Automotive Applications, Rev. 1.3
- Fulfills the OEM Requirements for Partial Networking Rev. 2.2
- SO14 Package
- Built-In Safety features
- Transmit data (TXD) dominant timeout function
- RXD recessive clamping detection
- Power-on Reset (POR)
- CAN Bus dominant/recessive clamp detection
- SPI with Failure Event detection
- Overtemperature protection
- Undervoltage detection on VS, VCC and VIO pins
- Watchdog with independent clock source
- Transceiver disengages from the bus in over-temperature and low power supply mode
Product Parameters
-
PackageCode
D3X
-
LeadContent
Pb-FREE
-
PackingMedia
T/R
-
TempLevel
Extended
-
Stage
REL
-
ProductClassDescription
Extended Temp (E) Tape & Reel
-
PackageWidth
.150in
-
Weight
0.000325
-
Mask
77A15
-
RestrictionLevel
STANDARD
-
PackageTypeDescription
SOIC
-
TempRange
-40C to +125C
-
LeadCount
14
-
PackageType
SOIC
-
PackingMediaDescription
Tape and reel
Associated Products
-
MCP3421A0T-E/CH
Microchip
Automotive voltage monitor with watchdog timer
-
PCF8578T/1,118
NXP
Automotive voltage monitor with watchdog timer
-
TESEO-VIC3DA
ST
Automotive voltage monitor with watchdog timer
-
74HC1G04GV-Q100H
Nexperia
Automotive voltage monitor with watchdog timer
-
BU931P
ST
Automotive voltage monitor with watchdog timer
-
TXS0108EQPWRQ1
TI
8-Bit Bi-directional, Level-Shifting, Voltage Tran...
Blogs
- How to Reset a Mass Air Flow Sensor
- How to Test an IGBT Using A Multimeter
- How to Reset a Nox Sensor
- How to Test Crankshaft Sensor with Multimeter
- How to Delete O2 Sensors from ECM
- ESP32 vs. STM32
- Difference Between BJT, MOSFET and IGBT: BJT vs MOSFET vs IGBT
- IGBT Symbol Diagram, Characteristics, Circuit
- How to Reset a Coolant Temperature Sensor
- CMOS vs BSI Sensor