
-
DS90UB913ATRTVJQ1
- For Product Pricing Customization Or Other Inquiries
- Contact Now
- Technical Documents
- Download Datasheet
Request Information For DS90UB913ATRTVJQ1












DS90UB913ATRTVJQ1 Overview
The DS90UB913A-Q1 device offers an FPD-Link III interface with a high-speed forward channel and a bidirectional control channel for data transmission over a single coaxial cable or differential pair. The DS90UB913A-Q1 device incorporates differential signaling on both the high-speed forward channel and bidirectional control channel data paths. The serializer/deserializer pair is targeted for connections between imagers and video processors in an ECU (Electronic Control Unit). This device is ideally suited for driving video data requiring up to 12-bit pixel depth plus two synchronization signals along with bidirectional control channel bus.
Using TI’s embedded clock technology allows transparent full-duplex communication over a single differential pair, carrying asymmetrical-bidirectional control channel information. This single serial stream simplifies transferring a wide data bus over PCB traces and cable by eliminating the skew problems between parallel data and clock paths. This significantly saves system cost by narrowing data paths that in turn reduce PCB layers, cable width, and connector size and pins. Internal DC-balanced encoding/decoding is used to support AC-coupled interconnects.
Features
- AEC-Q100 qualified for automotive applications
- Device temperature grade 2: –40℃ to +105℃ ambient operating temperature
- 25-MHz to 100-MHz input pixel clock support
- Programmable data payload:
- 10-Bit payload up to 100 MHz
- 12-Bit payload up to 75 MHz
- Continuous low latency bidirectional control interface channel with I2C support at 400 kHz
- Embedded clock with DC-balanced coding to support AC-coupled interconnects
- Capable of driving up to 15m coaxial or 20m shielded twisted-pair cables
- Robust Power-Over-Coaxial (PoC) operation
- 4 Dedicated general purpose input/output
- 1.8-V, 2.8-V, or 3.3-V-compatible parallel inputs on serializer
- Single power supply at 1.8 V
- ISO 10605 and IEC 61000-4-2 ESD compliant
- Small serializer footprint (5 mm × 5 mm)
Product Parameters
-
genericPartNumber
DS90UB913A-Q1
-
partDescription
25- to 100-MHz, 10-bit & 12-bit FPD-Link III serializer
-
statusDescription
This product has been released to the market and is available for purchase. For some products, newer alternatives may be available.
-
packageQtyCarrier
2500|LARGE T&R
-
orderablePartNumber
DS90UB913ATRTVJQ1
-
statusDisplay
ACTIVE
-
packageQuantity
2500
-
packagePins
WQFN (RTV)|32
Technical Documents
Other distributor's price
Distributor | Part # | Mfg. | Description | Price |
---|---|---|---|---|
![]() |
DS90UB913ATRTVJQ1 | Texas Instruments | IC SER/DES 10-100MHZ FPD 32WQFN |
2500---$5.2635 |
![]() |
DS90UB913ATRTVJQ1 | Texas Instruments | LVDS Serializer 1400Mbps Automotive 32-Pin WQFN EP T/R |
2500---$4.2110 |
![]() |
DS90UB913ATRTVJQ1 | Texas Instruments | Serializers & Deserializers - Serdes 25-100MHz 10/12B FPD Link III SERIALIZER |
1---$8.8600 10---$8.0000 25---$7.6300 100---$6.6300 250---$6.3300 500---$5.7700 1000---$5.4000 2500---$5.3900 |
Associated Products
-
DS90UB936TRGZTQ1
TI
1MP MIPI CSI-2 FPD-Link III Deserializer for 1MP/6...
-
DS90UB935TRHBRQ1
TI
FPD-Link III 3-Gbps serializer with CSI-2 interfac...
-
DS90UB924TRHSTQ1
TI
5 MHz to 96 MHz 24-bit Color FPD-Link III to OpenL...
-
TLV73325PDBVT
TI
300-mA, capacitor-free, low-IQ, low-dropout voltag...
-
DS90UB954TRGZRQ1
TI
Dual 2 MP FPD-Link III deserializer with CSI-2 out...
-
DS90UB947TRGCTQ1
TI
1080p oLDI Dual FPD-Link III Serializer
Blogs
- How to Reset a Mass Air Flow Sensor
- How to Test an IGBT Using A Multimeter
- How to Reset a Nox Sensor
- How to Test Crankshaft Sensor with Multimeter
- How to Delete O2 Sensors from ECM
- IGBT Symbol Diagram, Characteristics, Circuit
- Difference Between BJT, MOSFET and IGBT: BJT vs MOSFET vs IGBT
- ESP32 vs. STM32
- How to Reset a Coolant Temperature Sensor
- Throttle Position Sensor Diagram