
-
DS90UB914ATRHSRQ1
- For Product Pricing Customization Or Other Inquiries
- Contact Now
- Technical Documents
- Download Datasheet
Request Information For DS90UB914ATRHSRQ1












DS90UB914ATRHSRQ1 Overview
The DS90UB914A-Q1 device offers an FPD-Link III interface with a high-speed forward channel and a bidirectional control channel for data transmission over a single coaxial cable or differential pair. The DS90UB914A-Q1 device incorporates differential signaling on both the high-speed forward channel and bidirectional control channel data paths. The deserializer is targeted for connections between imagers and video processors in an ECU (Electronic Control Unit). This device is ideally suited for driving video data requiring up to 12-bit pixel depth plus two synchronization signals along with bidirectional control channel bus.
The deserializer features a multiplexer to allow selection between two input imagers, one active at a time. The primary video transport converts 10-bit or 12-bit data to a single high-speed serial stream, along with a separate low latency bidirectional control channel transport that accepts control information from an I2C port and is independent of video blanking period.
Using TI’s embedded clock technology allows transparent full-duplex communication over a single differential pair, carrying asymmetrical-bidirectional control channel information. This single serial stream simplifies transferring a wide data bus over PCB traces and cable by eliminating the skew problems between parallel data and clock paths. This significantly saves system cost by narrowing data paths that in turn reduce PCB layers, cable width, and connector size and pins. In addition, the Deserializer inputs provide adaptive equalization to compensate for loss from the media over longer distances. Internal DC-balanced encoding/decoding is used to support AC-coupled interconnects.
Features
- Qualified for automotive applications AEC-Q100
- Device temperature grade 2: –40℃ to +105℃ ambient operating temperature range
- Device HBM ESD classification level ±8kV
- Device CDM ESD classification level C6
- 25-MHz to 100-MHz Input Pixel Clock Support
- Programmable data payload:
- 10-bit Payload up to 100-MHz
- 12-bit Payload up to 75-MHz
- Continuous low latency bidirectional control interface channel with I2C support at 400-kHz
- 2:1 Multiplexer to choose between two input images
- Capable of receiving over 15-m coaxial or 20-m shielded twisted-pair cables
- Robust Power-Over-Coaxial (PoC) operation
- Receive equalizer automatically adapts for changes in cable loss
- LOCK output reporting pin and @SPEED BIST diagnosis feature to validate link integrity
- Single power supply at 1.8-V
- ISO 10605 and IEC 61000-4-2 ESD compliant
- EMI/EMC mitigation with programmable spread spectrum (SSCG) and receiver staggered outputs
Product Parameters
-
genericPartNumber
DS90UB914A-Q1
-
partDescription
25-100MHz 10/12-Bit FPD-Link III Deserializer
-
statusDescription
This product has been released to the market and is available for purchase. For some products, newer alternatives may be available.
-
packageQtyCarrier
1000|SMALL T&R
-
orderablePartNumber
DS90UB914ATRHSRQ1
-
statusDisplay
ACTIVE
-
packageQuantity
1000
-
packagePins
WQFN (RHS)|48
Technical Documents
-
Migrating DS90UB914A-Q1 Designs to DS90UB934-Q1 for Automotive ADAS Systems (Rev. A)Details>>
-
I2C Communication over DS90UB913/4 FPD Link-III with BCCDetails>>
-
Cable Requirements for the DS90UB913A and DS90UB914ADetails>>
-
Backwards Compatibility Modes for Operation With Parallel Output Deserializers (Rev. A)Details>>
Other distributor's price
Distributor | Part # | Mfg. | Description | Price |
---|---|---|---|---|
![]() |
DS90UB914ATRHSRQ1 | Texas Instruments | LVDS Deserializer 1400Mbps Automotive 48-Pin WQFN EP T/R |
1000---$4.9250 |
![]() |
DS90UB914ATRHSRQ1 | Texas Instruments | IC SER/DES 25-100MHZ FPD 48WQFN |
1000---$6.1560 |
![]() |
DS90UB914ATRHSRQ1 | Texas Instruments | LVDS Deserializer 1400Mbps Automotive 48-Pin WQFN EP T/R |
2---$11.9094 10---$10.7537 25---$10.2431 100---$9.1448 250---$8.7596 500---$8.1006 |
![]() |
DS90UB914ATRHSRQ1 | Texas Instruments | Serializers & Deserializers - Serdes 25-100MHz 10/12B FPD Link 3 Deserializer |
1---$10.3600 10---$9.3600 25---$8.9200 100---$7.7500 250---$7.4000 500---$6.7500 1000---$6.3100 |
Associated Products
-
DS90UB924TRHSTQ1
TI
5 MHz to 96 MHz 24-bit Color FPD-Link III to OpenL...
-
TLV73325PDBVT
TI
300-mA, capacitor-free, low-IQ, low-dropout voltag...
-
DS90UB935TRHBRQ1
TI
FPD-Link III 3-Gbps serializer with CSI-2 interfac...
-
TLV73330PDBVR
TI
300-mA, capacitor-free, low-IQ, low-dropout voltag...
-
DS90UB936TRGZTQ1
TI
1MP MIPI CSI-2 FPD-Link III Deserializer for 1MP/6...
-
TSC2003IPWR
TI
4-wire resistive touch screen controller with dire...
Blogs
- How to Reset a Mass Air Flow Sensor
- How to Test an IGBT Using A Multimeter
- How to Reset a Nox Sensor
- How to Test Crankshaft Sensor with Multimeter
- How to Delete O2 Sensors from ECM
- IGBT Symbol Diagram, Characteristics, Circuit
- Difference Between BJT, MOSFET and IGBT: BJT vs MOSFET vs IGBT
- ESP32 vs. STM32
- How to Reset a Coolant Temperature Sensor
- Throttle Position Sensor Diagram