-
DS92LV090ATVEHX/NOPB
- For Product Pricing Customization Or Other Inquiries
- Contact Now
- Technical Documents
- Download Datasheet
Request Information For DS92LV090ATVEHX/NOPB
DS92LV090ATVEHX/NOPB Overview
The DS90UB949A-Q1 is an HDMI-to-FPD-Link III bridge device which, when paired with the FPD-Link III DS90UB940-Q1/DS90UB948-Q1 deserializers, supplies 1-lane or 2-lane high-speed serial streams over cost-effective, 50-Ω single-ended coaxial, or 100-Ω differential shielded twisted-pair (STP) and shielded twisted quad (STQ) cables. The device can serialize an HDMI v1.4b input to support video resolutions up to 2880x1080 at 60 Hz with 24-bit color depth.
The FPD-Link III interface supports both video and audio data transmissions, and full duplex control—including I2C and SPI communication—over the same differential link. Video data consolidation and control over two differential pairs can help decrease the interconnect size, decrease the weight of the application, and simplify system design. EMI is minimized by the use of low-voltage differential signaling, data scrambling, and randomization. In backward-compatible mode, the DS90UB949A-Q1 supports up to 1920x720 resolution with 24-bit color depth over a single differential link when the device is paired with the DS90Ux92x-Q1 deserializers.
The DS90UB949A-Q1 supports multi-channel audio received through an external I2S interface. The device also has an optional auxiliary audio interface.
Features
- AEC-Q100 qualified for automotive applications:
- Device temperature grade 2: –40°C to 105°C, T
- A
- Supports TMDS clock frequencies up to 210 MHz for 3K (2880x1620) at 30Hz, QXGA (2048x1536), 2K (2880x1080), WUXGA (1920x1200), or 1080p60 with 24-bit color depth
- Single and dual FPD-Link III outputs, supports STP or STQ or coax cables
- High-definition multimedia (HDMI) v1.4b compatible inputs
- HDMI-Mode DisplayPort (DP++) inputs
- HDMI audio extraction for up to 8 channels
- High-speed back channel supporting GPIO up to 2 Mbps
- Tracks spread spectrum input clock to reduce EMI
- I2C (master/slave) with 1-Mbps fast-mode plus
- SPI pass-through interface
- Backward compatible with DS90UB926Q-Q1, DS90UB928Q-Q1, and DS90UB924-Q1 FPD-Link III deserializers
Product Parameters
-
genericPartNumber
DS92LV090A
-
partDescription
9-channel bus LVDS transceiver
-
statusDescription
This product has been released to the market and is available for purchase. For some products, newer alternatives may be available.
-
packageQtyCarrier
1000|LARGE T&R
-
orderablePartNumber
DS92LV090ATVEHX/NOPB
-
statusDisplay
ACTIVE
-
packageQuantity
1000
-
packagePins
LQFP (PM)|64
Associated Products
-
DS90UB936TRGZTQ1
TI
1MP MIPI CSI-2 FPD-Link III Deserializer for 1MP/6...
-
DS90UB954TRGZRQ1
TI
Dual 2 MP FPD-Link III deserializer with CSI-2 out...
-
DS90UB954TRGZTQ1
TI
Dual 2 MP FPD-Link III deserializer with CSI-2 out...
-
TLV73325PDBVT
TI
300-mA, capacitor-free, low-IQ, low-dropout voltag...
-
TLV73330PDBVR
TI
300-mA, capacitor-free, low-IQ, low-dropout voltag...
-
TSC2003IPWR
TI
4-wire resistive touch screen controller with dire...
Blogs
- How to Reset a Mass Air Flow Sensor
- How to Reset a Nox Sensor
- How to Test an IGBT Using A Multimeter
- How to Test Crankshaft Sensor with Multimeter
- IGBT Symbol Diagram, Characteristics, Circuit
- How to Delete O2 Sensors from ECM
- Difference Between BJT, MOSFET and IGBT: BJT vs MOSFET vs IGBT
- Throttle Position Sensor Diagram
- How to Reset a Coolant Temperature Sensor
- Top 15 Industrial Automation Companies In 2025