This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.
KSZ9031MNXIA

  • KSZ9031MNXIA

Request Information For KSZ9031MNXIA

AvNet Arrow DigiKey Element14 RS Netwark Future Mouser Farnell TME tti verical
Looking for one or more parts? Have any date code or packaging restrictions? Please let the stocking distributors know here.

KSZ9031MNXIA Overview

The KSZ9031 is a completely integrated triple-speed (10Base-T/100Base-TX/1000Base-T) Ethernet physical-layer transceiver for transmission and reception of data on standard CAT-5 unshielded twisted pair (UTP) cable.The KSZ9031MNX offers the industry-standard GMII/MII (Gigabit Media Independent Interface/Media Independent Interface) for connection to GMII/MII MACs in Gigabit Ethernet processors and switches for data transfer at 1000Mbps or 10/100Mbps. The KSZ9031RNX provides the reduced gigabit media independent interface (RGMII).The KSZ9031 reduces board cost and simplifies board layout by using on-chip termination resistors for the four differential pairs and by integrating an LDO controller to drive a low-cost MOSFET to supply the 1.2V core.The KSZ9031 offers diagnostic features to facilitate system bring-up and debugging in production testing and in product deployment. Parametric NAND tree support enables fault detection between KSZ9031 I/Os and the board. The LinkMD TDR-based cable diagnostic identifies faulty copper cabling. Remote and local loopback functions verify analog and digital data paths.The standard KSZ9031RNX is available in the 48-pin, lead-free QFN package, and the AEC-Q100 automotive qualified parts, KSZ9031RNXUB-VAO and KSZ9031RNXVB-VAO, are available in the 48-pin lead-free WQFN package. The KSZ9031MNX is available in a 64-pin, lead-free QFN package.Microchip's complimentary and confidential LANCheck online design review service is available for customers who have selected our products for their application design-in. The LANCheck online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.

Features

  • Single-chip 10/100/1000Mbps IEEE 802.3 compliant Ethernet transceiver
  • KSZ9031Mxx feature GMII/MII standard interface with 3.3V/2.5V/1.8V tolerant I/Os
  • KSZ9031Rxx feature RGMII timing supports on-chip delay according to RGMII Version 2.0, with programming options for external delay and making adjustments and corrections to TX and RX timing paths
  • GMII/MII/RGMII with 3.3V/2.5V/1.8V tolerant I/Os
  • Auto-negotiation to automatically select the highest linkup speed (10/100/1000Mbps) and duplex (half/full)
  • On-chip termination resistors for the differential pairs
  • On-chip LDO controller to support single 3.3V supply operation – requires only one external FET to generate 1.2V for the core
  • Jumbo frame support up to 16KB
  • 125MHz Reference Clock Output
  • Energy-detect power-down mode for reduced power consumption when the cable is not attached
  • Wake-on-LAN (WOL) support with robust custom-packet detection
  • AEC-Q100 qualified for automotive applications (KSZ9031RNXUB-VAO, KSZ9031RNXVB-VAO)
  • Programmable LED outputs for link, activity, and speed
  • Baseline wander correction
  • LinkMD  TDR-based cable diagnostic to identify faulty copper cabling
  • Parametric NAND tree support to detect faults between chip I/Os and board
  • Loopback modes for diagnostics
  • Automatic MDI/MDI-X crossover to detect and correct pair swap at all speeds of operation
  • Automatic detection and correction of pair swaps, pair skew, and pair polarity
  • MDC/MDIO management interface for PHY register configuration
  • Interrupt pin option
  • Power-down and power-saving modes
  • Operating voltages:
  • Core (DVDDL, AVDDL, AVDDL_PLL): 1.2V (external FET or regulator)
  • VDD I/O (DVDDH): 3.3V, 2.5V, or 1.8V
  • Transceiver (AVDDH): 3.3V or 2.5V (commercial temp)
  • Available in 48-pin QFN (7mm x 7mm) and 64-pin QFN (8mm x 8mm) packages

Product Parameters

  • Device Weight (g)

    0.177500

  • Package Width

    8x8x0.9mm

  • JEDEC Indicator

    e3

  • Shipping Weight (grams)

    1.026923

  • Solder Composition

    Matte Tin

Related Products

Other distributor's price

Distributor Part # Mfg. Description Price
digikey KSZ9031MNXIA Microchip Technology Inc IC TRANSCEIVER FULL 4/4 64QFN

260---$4.8474
onlinecomponents KSZ9031MNXIA Microchip Technology Inc PHY 1-CH 10Mbps/100Mbps/1Gbps 64-Pin QFN EP T/R

4---$7.7500

10---$7.6920

25---$6.2000

50---$6.1540

100---$5.0540

250---$4.8440

500---$4.8080
mouser KSZ9031MNXIA Microchip Technology Inc Ethernet ICs

1---$4.6500

Associated Products

Blogs

More Blogs