
-
LM4991MAX/NOPB
- For Product Pricing Customization Or Other Inquiries
- Contact Now
- Technical Documents
- Download Datasheet
Request Information For LM4991MAX/NOPB












LM4991MAX/NOPB Overview
The DS90CF384AQ receiver converts the four LVDS data streams at up to 1.8 Gbps throughput (227 Megabytes/sec bandwidth) back into parallel 28 bits of LVCMOS/LVTTL data. In a Display application, the 28 bits include: 24 bits of RGB data and up to 4 bits of video control (Hsync, Vsync, DE and CNTL).
The DS90CF384AQ device is enhanced over prior generation FPD-Link receivers, provides a wider data valid time on the receiver output and is offered as an AEC-Q100 grade 3 device.
FPD-Link is an ideal means to solve EMI and cable size problems associated with wide, high speed LVCMOS/LVTTL interfaces.
Features
- Automotive Grade Device, AEC-Q100 Grade 3 Qualified
- Operating Temperature Range: –40°C to +85°C
- 20 to 65 MHz Shift Clock Support
- 50% Duty Cycle on Receiver Output Clock
- Best–in–Class Set & Hold Times on RxOUTPUTs
- Rx Power Consumption <142 mW (typ) @65MHz Grayscale
- Rx Power-down Mode <200μW (max)
- ESD Rating >7 kV (HBM), >700V (EIAJ)
- Supports VGA, SVGA, XGA and Dual Pixel SXGA.
- PLL Requires No External Components
- Compatible with TIA/EIA-644 LVDS Standard
- Low Profile 56-Lead TSSOP Package
- All trademarks are the property of their respective owners.
Product Parameters
-
genericPartNumber
LM4991
-
partDescription
3.0-W, mono, analog input Class-AB audio amplifier
-
statusDescription
This product has been released to the market and is available for purchase. For some products, newer alternatives may be available.
-
packageQtyCarrier
2500|LARGE T&R
-
orderablePartNumber
LM4991MAX/NOPB
-
statusDisplay
ACTIVE
-
packageQuantity
2500
-
packagePins
SOIC (D)|8
Technical Documents
-
TFT Data Mapping for Dual Pixel LDI Application - Alternate A - Color MapDetails>>
-
How to Map RGB Signals to LVDS/OpenLDI(OLDI) Displays (Rev. A)Details>>
-
AN-1085 FPD-Link PCB and Interconnect Design-In GuidelinesDetails>>
-
AN-1032 An Introduction to FPD-Link (Rev. C)Details>>
-
AN-1056 STN Application Using FPD-LinkDetails>>
Associated Products
-
DS90UB924TRHSTQ1
TI
5 MHz to 96 MHz 24-bit Color FPD-Link III to OpenL...
-
TLV73325PDBVT
TI
300-mA, capacitor-free, low-IQ, low-dropout voltag...
-
DS90UB936TRGZTQ1
TI
1MP MIPI CSI-2 FPD-Link III Deserializer for 1MP/6...
-
DS90UB935TRHBRQ1
TI
FPD-Link III 3-Gbps serializer with CSI-2 interfac...
-
DS90UB960WRTDTQ1
TI
Quad 2 MP camera hub FPD-Link III deserializer wit...
-
TLV73330PDBVR
TI
300-mA, capacitor-free, low-IQ, low-dropout voltag...
Blogs
- How to Reset a Mass Air Flow Sensor
- How to Test an IGBT Using A Multimeter
- How to Reset a Nox Sensor
- How to Test Crankshaft Sensor with Multimeter
- How to Delete O2 Sensors from ECM
- IGBT Symbol Diagram, Characteristics, Circuit
- Difference Between BJT, MOSFET and IGBT: BJT vs MOSFET vs IGBT
- ESP32 vs. STM32
- How to Reset a Coolant Temperature Sensor
- Throttle Position Sensor Diagram