
-
MC33174DTB
- For Product Pricing Customization Or Other Inquiries
- Contact Now
- Technical Documents
- Download Datasheet
Request Information For MC33174DTB












MC33174DTB Overview
Quality bipolar fabrication with innovative design concepts are employed for the MC33171/72/74 series of monolithic op-amps. These devices operate at 180 A per amplifier and offer 1.8 MHz of gain bandwidth product and 2.1 V/s slew rate without the use of JFET device technology. Although this series can be operated from split supplies, it is particularly suited for single supply operation, since the common mode input voltage includes ground potential (VEE). With a Darlington input stage, these devices exhibit high input resistance, low input offset voltage and high gain. The all NPN output stage, characterized by no deadband crossover distortion and large output voltage swing, provides high capacitance drive capability, excellent phase and gain margins, low open loop high frequency output impedance and symmetrical source/sink AC frequency response.The MC33171/72/74 are specified over the industrial / automotive temperature ranges. The complete series of single, dual and quad op-amps are available in plastic as well as the surface mount packages.
Features
- Low Supply Current: 180 μA (Per Amplifier)
- Wide Supply Operating Range: 3.0 V to 44 V or+/-1.5 V to +/- 22 V
- Wide Input Common Mode Range, Including Ground (V
- EE
- Wide Bandwidth: 1.8 MHz
- High Slew Rate: 2.1 V/μs
- Low Input Offset Voltage: 2.0 mV
- Large Output Voltage Swing: -14.2 V to +14.2 V (with +/-15 V Supplies)
- Large Capacitance Drive Capability: 0 pF to 500 pF
- Low Total Harmonic Distortion: 0.03%
- Excellent Phase Margin: 60 C°
- Excellent Gain Margin: 15 dB
- Output Short Circuit Protection
- ESD Diodes Provide Input Protection for Dual and Quad
Other distributor's price
Distributor | Part # | Mfg. | Description | Price |
---|---|---|---|---|
![]() |
MC33174DTB | onsemi | IC OPAMP GP 4 CIRCUIT 14TSSOP |
2500---$0.6251 |
![]() |
MC33174DTB | onsemi | Op Amp Quad Low Power Amplifier ±22V/44V 14-Pin TSSOP W T/R |
2500---$0.4778 |
![]() |
MC33174DTB | onsemi | Op Amp Quad Low Power Amplifier ±22V/44V 14-Pin TSSOP W T/R |
14---$1.1258 25---$1.0706 100---$0.8837 250---$0.8274 500---$0.7330 |
![]() |
MC33174DTB | onsemi | OP Amp Quad GP ±22V/44V 14-Pin TSSOP T/R - Tape and Reel (Alt: MC33174DTBR2G) |
2500---$0.5220 5000---$0.5081 10000---$0.4942 15000---$0.4802 20000---$0.4663 |
![]() |
MC33174DTB | onsemi | MC Series 2.1 V/us 44 V Single Supply Low Power Operational Amplifier - SOIC-14 |
2500---$0.5100 5000---$0.5000 7500---$0.4950 10000---$0.4850 |
![]() |
MC33174DTB | onsemi | Operational Amplifiers - Op Amps 3-44V Quad Low Power Industrial Temp |
1---$1.2700 10---$1.1400 25---$1.0800 100---$0.8870 250---$0.8290 500---$0.7330 1000---$0.5790 2500---$0.5390 |
![]() |
MC33174DTB | onsemi | Opamp, 1.8Mhz, -40 To 85Deg C Rohs Compliant: Yes |Onsemi MC33174DTBR2G |
1---$1.2700 10---$1.1400 25---$1.0800 50---$0.9840 100---$0.8870 250---$0.8290 500---$0.7330 1000---$0.5790 |
Associated Products
-
MC33172DR2G
Onsemi
Automotive voltage monitor with watchdog timer
-
ISO7760FQDBQRQ1
TI
Automotive, robust EMC, six-channel, 6/0, reinforc...
-
ATMXT449T-AT
Microchip
Automotive voltage monitor with watchdog timer
-
MC33972ATEW
NXP
Automotive voltage monitor with watchdog timer
-
MC33172PG
Onsemi
Automotive voltage monitor with watchdog timer
-
S9KEAZ128ACLH
NXP
Automotive voltage monitor with watchdog timer
Blogs
- How to Reset a Mass Air Flow Sensor
- How to Test an IGBT Using A Multimeter
- How to Reset a Nox Sensor
- How to Test Crankshaft Sensor with Multimeter
- How to Delete O2 Sensors from ECM
- ESP32 vs. STM32
- Difference Between BJT, MOSFET and IGBT: BJT vs MOSFET vs IGBT
- IGBT Symbol Diagram, Characteristics, Circuit
- How to Reset a Coolant Temperature Sensor
- CMOS vs BSI Sensor