This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

-
PIC16F884-I/P
- For Product Pricing Customization Or Other Inquiries
- Contact Now
- Technical Documents
- Download Datasheet
Request Information For PIC16F884-I/P












Looking for one or more parts? Have any date code or packaging restrictions? Please let the stocking distributors know here.
PIC16F884-I/P Overview
This powerful yet easy-to-program (only 35 single word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip's powerful PIC architecture into a 44 pin package.The PIC16F884 features 256 bytes of EEPROM data memory, self programming, an ICD, 2 Comparators, 14 channels of 10-bit Analog-to-Digital (A/D) converter, 1 capture/compare/PWM and 1 Enhanced capture/compare/PWM functions, a synchronous serial port that can be configured as either 3-wire Serial Peripheral Interface (SPI ) or the 2-wire Inter-Integrated Circuit (I2C ) bus and an Enhanced Universal Asynchronous Receiver Transmitter (EUSART). All of these features make it ideal for more advanced level A/D applications in automotive, industrial, appliances or consumer applications.Features
- Factory calibrated to ±1%
- Software selectable frequency range of 8 MHz to 32 kHz
- Software tunable
- Two-Speed Start-Up mode
- Fail-safe clock monitoring for critical applications
- Clock mode switching during operation for low-power operation
- Power-Saving Sleep mode
- Power-on Reset (POR)
- Selectable Brown-out Reset (BOR) voltage
- Extended Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation
- In-Circuit Serial Programming (ICSP ) via two pins
- In-Circuit Debug (ICD) via two pins
- 100,000 erase/write cycle enhanced Flash program memory, typical
- 1,000,000 erase/write cycle data EEPROM memory, typical
- Data EEPROM retention > 40 years
- Self-reprogrammable under software control
- Programmable code protection
- 1 input only pin
- 36 I/O
- High sink/source current 25 mA
- Interrupt-on-pin change option
- TMR0: 8-bit timer/counter with 8-bit prescaler
- TMR1 enhanced: 16-bit timer/counter with prescaler, External Gate Input mode anddedicated low-power 32 kHz oscillator
- TMR2: 8-bit timer/counter with 8-bit period register, prescaler and postscaler
- Capture/Compare/PWM (CCP) module
- Enhanced Capture/Compare/PWM (ECCP) module with auto-shutdown and PWM steering
- Master Synchronous Serial Port (MSSP) module SPI mode, I2C mode with address maskcapability
- Supports RS-485, RS-232 and LIN compatibility
- Auto-Baud Detect
- Auto-wake-up on Start bit
- Ultra Low-Power Wake-up (ULPWU)
- 10-bit 14 channel Analog-to-Digital (A/D) Converter
- Programmable on-chip Voltage Reference (CVREF) module (% of VDD)
- Fixed 0.6 Vref
- Comparator inputs and outputs externally accessible
- SR Latch mode
Product Parameters
-
PackageCode
S2X
-
LeadContent
Pb-FREE
-
PackingMedia
TUBE
-
TempLevel
Industrial
-
Stage
REL
-
ProductClassDescription
Industrial Temp (I)
-
PackageWidth
.600in
-
Weight
0.0106
-
Mask
DECU1
-
RestrictionLevel
STANDARD
-
PackageTypeDescription
PDIP
-
TempRange
-40C to +85C
-
LeadCount
40
-
PackageType
PDIP
-
PackingMediaDescription
Tube
Associated Products
-
PIC16F882-I/SS
Microchip
Automotive voltage monitor with watchdog timer
-
PIC16F676-I/P
Microchip
Automotive voltage monitor with watchdog timer
-
MCIMX257CJM4A
-
PIC16C558-20/SO
Microchip
Automotive voltage monitor with watchdog timer
-
TMS5704357BZWTQQ1
TI
16/32 Bit RISC Flash MCU, Arm Cortex-R5F, EMAC, Fl...
Blogs
- How to Reset a Mass Air Flow Sensor
- How to Test an IGBT Using A Multimeter
- How to Reset a Nox Sensor
- How to Test Crankshaft Sensor with Multimeter
- How to Delete O2 Sensors from ECM
- ESP32 vs. STM32
- Difference Between BJT, MOSFET and IGBT: BJT vs MOSFET vs IGBT
- IGBT Symbol Diagram, Characteristics, Circuit
- How to Reset a Coolant Temperature Sensor
- CMOS vs BSI Sensor