
-
SN74HC595PWR
- For Product Pricing Customization Or Other Inquiries
- Contact Now
- Technical Documents
- Download Datasheet
Request Information For SN74HC595PWR












SN74HC595PWR Overview
The SN65LVDS95 LVDS serdes (serializer/deserializer) transmitter contains three 7-bit parallel-load serial-out shift registers, a 7× clock synthesizer, and four low-voltage differential signaling (LVDS) line drivers in a single integrated circuit. These functions allow 21 bits of single-ended LVTTL data to be synchronously transmitted over 4 balanced-pair conductors for receipt by a compatible receiver, such as the SN65LVDS96.
When transmitting, data bits D0 through D20 are each loaded into registers of the SN65LVDS95 on the rising edge of the input clock signal (CLKIN). The frequency of CLKIN is multiplied seven times and then used to serially unload the data registers in 7-bit slices. The three serial streams and a phase-locked clock (CLKOUT) are then output to LVDS output drivers. The frequency of CLKOUT is the same as the input clock, CLKIN.
The SN65LVDS95 requires no external components and little or no control. The data bus appears the same at the input to the transmitter and output of the receiver with data transmission transparent to the user(s). The only user intervention is the possible use of the shutdown/clear (SHTDN) active-low input to inhibit the clock and shut off the LVDS output drivers for lower power consumption. A low level on this signal clears all internal registers to a low level.
Features
- Qualified for Automotive Applications
- 21:3 Data Channel Compression at up to 1.36 Gigabits per Second Throughput
- Suited for Point-to-Point Subsystem Communication With Very Low EMI
- 21 Data Channels Plus Clock in Low-Voltage TTL and 3 Data Channels Plus Clock Out Low-Voltage Differential
- Operates From a Single 3.3-V Supply and 250 mW (Typ)
- 5-V Tolerant Data Inputs
- Bus Pins Tolerate 6-kV HBM ESD
- Packaged in Thin Shrink Small-Outline Package With 20 Mil Terminal Pitch
- Consumes <1 mW When Disabled
- Wide Phase-Lock Input Frequency Range
- No External Components Required for PLL
- Inputs Meet or Exceed the Requirements of ANSI EIA/TIA-644 Standard
- Industrial Temperature Qualified
- A
- Replacement for the National DS90CR215
Product Parameters
-
genericPartNumber
SN74HC595
-
partDescription
8-bit shift registers with 3-state output registers
-
statusDescription
This product has been released to the market and is available for purchase. For some products, newer alternatives may be available.
-
packageQtyCarrier
2000|LARGE T&R
-
orderablePartNumber
SN74HC595PWR
-
statusDisplay
ACTIVE
-
packageQuantity
2000
-
packagePins
TSSOP (PW)|16
Other distributor's price
Distributor | Part # | Mfg. | Description | Price |
---|---|---|---|---|
![]() |
SN74HC595PWR | Texas Instruments | Shift Register Single 8-Bit Serial to Serial/Parallel 16-Pin TSSOP T/R |
2000---$0.1860 |
![]() |
SN74HC595PWR | Texas Instruments | IC SHIFT REGISTER SGL 8B 16TSSOP |
2000---$0.2248 6000---$0.2092 10000---$0.2015 50000---$0.1906 |
Associated Products
-
DS90UB936TRGZTQ1
TI
1MP MIPI CSI-2 FPD-Link III Deserializer for 1MP/6...
-
DS90UB935TRHBRQ1
TI
FPD-Link III 3-Gbps serializer with CSI-2 interfac...
-
DS90UB924TRHSTQ1
TI
5 MHz to 96 MHz 24-bit Color FPD-Link III to OpenL...
-
TLV73325PDBVT
TI
300-mA, capacitor-free, low-IQ, low-dropout voltag...
-
DS90UB954TRGZRQ1
TI
Dual 2 MP FPD-Link III deserializer with CSI-2 out...
-
DS90UB947TRGCTQ1
TI
1080p oLDI Dual FPD-Link III Serializer
Blogs
- How to Reset a Mass Air Flow Sensor
- How to Test an IGBT Using A Multimeter
- How to Reset a Nox Sensor
- How to Test Crankshaft Sensor with Multimeter
- How to Delete O2 Sensors from ECM
- IGBT Symbol Diagram, Characteristics, Circuit
- Difference Between BJT, MOSFET and IGBT: BJT vs MOSFET vs IGBT
- ESP32 vs. STM32
- How to Reset a Coolant Temperature Sensor
- Throttle Position Sensor Diagram