
-
TXS0104EQPWRQ1
- For Product Pricing Customization Or Other Inquiries
- Contact Now
- Technical Documents
- Download Datasheet
Request Information For TXS0104EQPWRQ1












TXS0104EQPWRQ1 Overview
The TXS0104E-Q1 device connects an incompatible logic communication from chip-to-chip due to voltage mismatch. This auto-direction translator can be conveniently used to bridge the gap without the need of direction control from the host. Each channel can be mixed and matched with different output types (open-drain or push-pull) and mixed data flows (transmit or receive) without intervention from the host. This 4-bit noninverting translator uses two separate configurable power-supply rails. The A and B ports are designed to track VCCA and VCCB respectively. The VCCB pin accepts any supply voltage from 2.3 V to 5.5 V while the VCCA pin accepts any supply voltage from 1.65 V to 3.6 V such that VCCA is less than or equal to VCCB. This tracking allows for low-voltage bidirectional translation between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes.
When the output-enable (OE) input is low, all outputs are placed in the high-impedance state.
The TXS0104E-Q1 device is designed so that the OE input circuit is supplied by VCCA.
To ensure the high-impedance state during power up or power down, the OE pin must be tied to the GND pin through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
For all available packages, see the orderable addendum at the end of the data sheet.Features
- Qualified for Automotive Applications
- AEC-Q100 Qualified With the Following
Results:
- Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature Range
- Device HBM ESD Classification Level 2
- Device CDM ESD Classification Level C6
- No Direction-Control Signal Required
- Maximum Data Rates
- 24 Mbps Maximum (Push Pull)
- 2 Mbps (Open Drain)
- 1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B port (VCCA ≤ VCCB)
- No Power-Supply Sequencing Required—VCCA or VCCB Can Be Ramped First
- ESD Protection Exceeds JESD 22
- A Port
- 2000-V Human-Body Model (A114-B)
- 1000-V Charged-Device Model (C101)
- B Port
- 15-kV Human-Body Model (A114-B)
- 1000-V Charged-Device Model (C101)
- A Port
- IEC 61000-4-2 ESD (B
Port)
- ±8-kV Contact Discharge
- ±10-kV Air-Gap Discharge
All trademarks are the property of their respective owners.
Product Parameters
-
genericPartNumber
TXS0104E-Q1
-
partDescription
Automotive Catalog 4-Bit Bidirectional Voltage-Level Translator for Open-Drain Applications
-
statusDescription
This product has been released to the market and is available for purchase. For some products, newer alternatives may be available.
-
packageQtyCarrier
2000|LARGE T&R
-
orderablePartNumber
TXS0104EQPWRQ1
-
statusDisplay
ACTIVE
-
packageQuantity
2000
-
packagePins
TSSOP (PW)|14
Other distributor's price
Distributor | Part # | Mfg. | Description | Price |
---|---|---|---|---|
![]() |
TXS0104EQPWRQ1 | Texas Instruments | Voltage Level Translator 4-CH Bidirectional Automotive 14-Pin TSSOP T/R |
2000---$0.4668 |
![]() |
TXS0104EQPWRQ1 | Texas Instruments | IC TRANSLATOR BIDIR 14TSSOP |
2000---$0.6494 |
![]() |
TXS0104EQPWRQ1 | Texas Instruments | Voltage Level Translator 4-CH Bidirectional Automotive 14-Pin TSSOP T/R |
11---$1.5072 25---$1.4500 100---$1.2182 250---$1.1428 500---$1.0222 1000---$0.9098 |
![]() |
TXS0104EQPWRQ1 | Texas Instruments | Buffers, drivers, receivers and transceivers |
1---$1.2300 10---$0.9050 50---$0.8530 100---$0.7410 200---$0.7070 1000---$0.6470 2000---$0.6150 4000---$0.6030 |
![]() |
TXS0104EQPWRQ1 | Texas Instruments | Translation - Voltage Levels AC 4B Bidirect Vtg- Level Translator |
1---$1.5100 10---$1.3600 25---$1.2900 100---$1.0600 250---$0.9870 500---$0.8720 1000---$0.6890 2000---$0.6660 |
Associated Products
-
TESEO-VIC3DA
ST
Automotive voltage monitor with watchdog timer
-
TXS0108EQPWRQ1
TI
8-Bit Bi-directional, Level-Shifting, Voltage Tran...
-
PCF8578T/1,118
NXP
Automotive voltage monitor with watchdog timer
-
BU931P
ST
Automotive voltage monitor with watchdog timer
-
MCP3421A0T-E/CH
Microchip
Automotive voltage monitor with watchdog timer
-
NZ9F4V3ST5G
Onsemi
Automotive voltage monitor with watchdog timer
Blogs
- How to Reset a Mass Air Flow Sensor
- How to Test an IGBT Using A Multimeter
- How to Reset a Nox Sensor
- How to Test Crankshaft Sensor with Multimeter
- How to Delete O2 Sensors from ECM
- ESP32 vs. STM32
- Difference Between BJT, MOSFET and IGBT: BJT vs MOSFET vs IGBT
- IGBT Symbol Diagram, Characteristics, Circuit
- How to Reset a Coolant Temperature Sensor
- CMOS vs BSI Sensor