
-
TXS0108EQPWRQ1
- For Product Pricing Customization Or Other Inquiries
- Contact Now
- Technical Documents
- Download Datasheet
Request Information For TXS0108EQPWRQ1












TXS0108EQPWRQ1 Overview
This device is an 8-bit non-inverting level translator that uses two separate configurable power-supply rails. The A port tracks the VCCA pin supply voltage. The VCCA pin accepts any supply voltage between 1.4 V and 3.6 V. The B port tracks the VCCB pin supply voltage. The VCCB pin accepts any supply voltage between 1.65 V and 5.5 V. Two input supply pins allows for low Voltage bidirectional translation between any of the 1.5 V, 1.8 V, 2.5 V, 3.3 V, and 5 V voltage nodes.
When the output-enable (OE) input is low, all outputs are placed in the high-impedance (Hi-Z) state.
To ensure the Hi-Z state during power-up or power-down periods, tie OE to GND through a pull-down resistor. The minimum value of the resistor is determined by the current-sourcing capability of the driver.
Features
- AEC-Q100 Qualified for Automotive Applications
- Device Temperature Grade 1: –40°C to 125°C
- Device HBM ESD Classification Level 2
- Device CDM ESD Classification Level C6
- No direction-control signal needed
- Maximum data rates
- 110 Mbps (push pull)
- 1.2 Mbps (open drain)
- 1.4 V to 3.6 V on A port and 1.65 V to 5.5 V on B port (VCCA ≤ VCCB)
- No power-supply sequencing required – either VCCA or VCCB can be ramped first
- Latch-up performance exceeds 100 mA per
JESD 78, Class II - ESD protection exceeds JESD 22 (A Port)
- 2000-V human body model (A114-B)
- 1000-V charged-device model (C101)
- IEC 61000-4-2 ESD (B port)
- ±8 kV contact discharge
- ±6 kV Air-gap discharge
Product Parameters
-
genericPartNumber
TXS0108E-Q1
-
partDescription
8-Bit Bi-directional, Level-Shifting, Voltage Translator for Open-Drain and Push-Pull Applications
-
statusDescription
This product has been released to the market and is available for purchase. For some products, newer alternatives may be available.
-
packageQtyCarrier
2000|LARGE T&R
-
orderablePartNumber
TXS0108EQPWRQ1
-
statusDisplay
ACTIVE
-
packageQuantity
2000
-
packagePins
TSSOP (PW)|20
Other distributor's price
Distributor | Part # | Mfg. | Description | Price |
---|---|---|---|---|
![]() |
TXS0108EQPWRQ1 | Texas Instruments | IC TRANSLATOR BIDIR 20TSSOP |
2000---$0.8880 |
![]() |
TXS0108EQPWRQ1 | Texas Instruments | Voltage Level Translator 8-CH Bidirectional Automotive 20-Pin TSSOP T/R |
2000---$0.7104 |
![]() |
TXS0108EQPWRQ1 | Texas Instruments | Translation - Voltage Levels 8-Bit Bi-directional, Level-Shifting, Voltage Translator for Open-Drain and Push-Pull Applications 20-TSSOP -40 to 125 |
1---$1.8500 10---$1.6700 25---$1.5700 100---$1.3400 250---$1.2600 500---$1.1000 1000---$0.9110 2000---$0.9100 |
Associated Products
-
PCF8578T/1,118
NXP
Automotive voltage monitor with watchdog timer
-
BU931P
ST
Automotive voltage monitor with watchdog timer
-
SCT3017ALHRC11
Rohm
Automotive voltage monitor with watchdog timer
-
NZ9F4V3ST5G
Onsemi
Automotive voltage monitor with watchdog timer
-
AUIRFR4620
infineon
Automotive voltage monitor with watchdog timer
-
74HC1G04GV-Q100H
Nexperia
Automotive voltage monitor with watchdog timer
Blogs
- How to Reset a Mass Air Flow Sensor
- How to Test an IGBT Using A Multimeter
- How to Reset a Nox Sensor
- How to Test Crankshaft Sensor with Multimeter
- How to Delete O2 Sensors from ECM
- ESP32 vs. STM32
- Difference Between BJT, MOSFET and IGBT: BJT vs MOSFET vs IGBT
- IGBT Symbol Diagram, Characteristics, Circuit
- How to Reset a Coolant Temperature Sensor
- CMOS vs BSI Sensor