
-
LM3481MMX/NOPB
- For Product Pricing Customization Or Other Inquiries
- Contact Now
- Technical Documents
- Download Datasheet
Request Information For LM3481MMX/NOPB












LM3481MMX/NOPB Overview
The LM3481 device is a versatile Low-Side N-FET high-performance controller for switching regulators. The device is suitable for use in topologies requiring a low-side FET, such as boost, flyback, SEPIC, and so on. The LM3481 device can be operated at extremely high switching frequencies to reduce the overall solution size. The switching frequency of the LM3481 device can be adjusted to any value between 100kHz and 1MHz by using a single external resistor or by synchronizing it to an external clock. Current mode control provides superior bandwidth and transient response in addition to cycle-by-cycle current limiting. Current limit can be programmed with a single external resistor.
The LM3481 device has built-in protection features such as thermal shutdown, short-circuit protection and overvoltage protection. Power-saving shutdown mode reduces the total supply current to 5 μA and allows power supply sequencing. Internal soft-start limits the inrush current at start-up.
Features
- LM3481QMM are Automotive-Grade Products
That are AEC-Q100 Grade 1 Qualified (–40°C to
+125°C Operating Junction Temperature) - 10-Lead VSSOP Package
- Internal Push-Pull Driver With 1-A Peak Current
Capability - Current Limit and Thermal Shutdown
- Frequency Compensation Optimized With a Capacitor
and a Resistor - Internal Softstart
- Current Mode Operation
- Adjustable Undervoltage Lockout With Hysteresis
- Pulse Skipping at Light Loads
- Key Specifications
- Wide Supply Voltage Range of 2.97 V to 48 V
- 100-kHz to 1-MHz Adjustable and Synchronizable
Clock Frequency - ±1.5% (Over Temperature) Internal
Reference - 10-μA Shutdown Current (Over Temperature)
Product Parameters
-
genericPartNumber
LM3481
-
partDescription
2.97V to 48V High-Efficiency Controller for Boost, SEPIC and Flyback
-
statusDescription
This product has been released to the market and is available for purchase. For some products, newer alternatives may be available.
-
packageQtyCarrier
3500|LARGE T&R
-
orderablePartNumber
LM3481MMX/NOPB
-
statusDisplay
ACTIVE
-
packageQuantity
3500
-
packagePins
VSSOP (DGS)|10
Technical Documents
-
Modeling & Design of Current Mode Control Boost Converters (Rev. B)Details>>
-
Softstart Using Constant Current Constant Voltage ApproachDetails>>
-
LM34xx How to Design Flyback Converter with LM3481 Boost Controller (Rev. A)Details>>
-
AN-1990 Compensation for Current Mode Control SEPIC Converters (Rev. A)Details>>
-
Demystifying Type II and Type III Compensators Using Op-Amp and OTA for DC/DC CoDetails>>
Associated Products
-
SBC846BDW1T1G
Onsemi
Automotive voltage monitor with watchdog timer
-
NCV8705MTADJTCG
Onsemi
Automotive voltage monitor with watchdog timer
-
1SMA5927BT3G
Onsemi
Automotive voltage monitor with watchdog timer
-
MMSZ15T1G
Onsemi
Automotive voltage monitor with watchdog timer
-
BD450M2FP3-CE2
Rohm
Automotive voltage monitor with watchdog timer
-
ISL78214ARZ
Renesas
Automotive voltage monitor with watchdog timer
Blogs
- How to Reset a Mass Air Flow Sensor
- How to Test an IGBT Using A Multimeter
- How to Reset a Nox Sensor
- How to Test Crankshaft Sensor with Multimeter
- How to Delete O2 Sensors from ECM
- IGBT Symbol Diagram, Characteristics, Circuit
- Difference Between BJT, MOSFET and IGBT: BJT vs MOSFET vs IGBT
- ESP32 vs. STM32
- How to Reset a Coolant Temperature Sensor
- CMOS vs BSI Sensor