-
LM3489MM/NOPB
- For Product Pricing Customization Or Other Inquiries
- Contact Now
- Technical Documents
- Download Datasheet
Request Information For LM3489MM/NOPB
LM3489MM/NOPB Overview
The LM3489 device is a high-efficiency PFET switching regulator controller that can be used to quickly and easily develop a small, cost-effective, switching buck regulator for a wide range of applications. The hysteretic control architecture provides for simple design without any control loop stability concerns using a wide variety of external components. The PFET architecture also allows for low component count as well as ultra-low dropout, 100% duty cycle operation. Another benefit is high efficiency operation at light loads without an increase in output ripple. A dedicated enable pin provides a shutdown mode drawing only 7 μA. Leaving the enable pin unconnected defaults to on.
Current limit protection can be implemented by measuring the voltage across the PFET’s RDS(ON), thus eliminating the need for a sense resistor. A sense resistor may be used to improve current limit accuracy if desired. The cycle-by-cycle current limit can be adjusted with a single resistor, ensuring safe operation over a range of output currents.
Features
- Qualified for Automotive Parts
- AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range
- Device HBM ESD Classification Level 2
- Device CDM ESD Classification Level C5
- Easy-to-Use Control Methodology
- No Control Loop Compensation Required
- Wide 4.5-V to 35-V Input Range
- 1.239 V to VIN Adjustable Output Range
- High Efficiency: 93%
- ±1.3% (±2% Over Temperature) Internal Reference
- 100% Duty Cycle Operation
- Maximum Operation Frequency > 1 MHz
- Current Limit Protection
- Dedicated Enable Pin (on if Unconnected)
- Shutdown Mode Draws Only 7-μA Supply Current
- 8-Pin VSSOP Package
Product Parameters
-
genericPartNumber
LM3489
-
partDescription
Hysteretic PFET Buck Controller with Enable Pin
-
statusDescription
This product has been released to the market and is available for purchase. For some products, newer alternatives may be available.
-
packageQtyCarrier
1000|SMALL T&R
-
orderablePartNumber
LM3489MM/NOPB
-
statusDisplay
ACTIVE
-
packageQuantity
1000
-
packagePins
VSSOP (DGK)|8
Technical Documents
-
Designing Non-Invert Buck-Boost (Zeta) Cnvrts w/a Buck P-FET CntrlDetails>>
Associated Products
-
SBC846BDW1T1G
Onsemi
Automotive voltage monitor with watchdog timer
-
NCV8705MTADJTCG
Onsemi
Automotive voltage monitor with watchdog timer
-
1SMA5927BT3G
Onsemi
Automotive voltage monitor with watchdog timer
-
MMSZ15T1G
Onsemi
Automotive voltage monitor with watchdog timer
-
BD450M2FP3-CE2
Rohm
Automotive voltage monitor with watchdog timer
-
ISL78214ARZ
Renesas
Automotive voltage monitor with watchdog timer
Blogs
- How to Test an IGBT Using A Multimeter
- ESP32 vs. STM32
- How to Reset a Nox Sensor
- How to Delete O2 Sensors from ECM
- How to Reset a Mass Air Flow Sensor
- Difference Between BJT, MOSFET and IGBT: BJT vs MOSFET vs IGBT
- Can I Use a Downstream Oxygen Sensor for Upstream
- Difference Between IGBT and Thyristor 【IGBT vs Thyristor】
- IGBT Rectifier: All You Want to Know
- Where are Radar Sensors on Mercedes