Features

• S08 Central Processor Unit (CPU)
• Up to 40 MHz HCS08 CPU up to 5V and across a temperature range of -40°C to +85°C
• HCS08 instruction set with added BGND instruction
• LCD Driver and Internal Charge Pump
• Integrated LCD driver supports both standard 3V and 5V LCD glass
• Configurable display for 8 x 37 or 4 x 41 segment display
• Low-power blinking mode
• Support both internal charge pump mode and Rbias mode
• Front plane (FP) and black plane (BP) re-assignments
• Capable of running in STOP3 and STOP2 mode
• LCD driver pins are muxed with GPIO and other functions
• Electro Magnetic Interference/Compatibility (EMI / EMC)
• Multiple VDD, VSS pairs for 80- and 64-pin devices
• Robust I/O design
• On-Chip Memory
• Up to 32 KB flash comprised of two separate arrays to facilitate read/program/erase over full operating voltage and temperature
• 2V to 5.5V RAM
• Peripherals
• Analog-to-digital converter (ADC)—16-channel, 12-bit resolution
• 2.5 μs conversion time
• Automatic compare function
• Internal temperature sensor
• Internal bandgap reference channel
• operation in stop mode
• Timers— MTIM
• simple 8-bit timer with four software-selectable clock sources
• programmable interrupt.
• One 2-channel (TPM1); and one 6-channel (TPM2) selectable input capture, output compare, buffered-edge or center-aligned PWM on each channel
• Two Serial communications interfaces (SCI)
• asynchronous communications
• 13-bit break option
• flexible baud rate generator
• double buffered transmit and receive and optional HW parity checking and generation
• Serial peripheral interface (SPI)
• one module with full-duplex or single-wire bidirectional
• double-buffered transmit and receive
• leader or follower
• MSB-first or LSB-first shifting
• I
• 2
• C with up to 100 kbps with maximum bus loading
• multi-controller operation; programmable target address
• interrupt-driven byte-by-byte data transfer
• supports broadcast mode and 10-bit addressing
• The Real-Time Counter (RTC) module
• one 8-bit counter
• one 8-bit comparator
• several binary-based and decimal-based prescaler dividers
• three clock sources
• one programmable periodic interupt
• Input/Output
• Up to 69 general purpose input/output (GPIO), two output-only pins
• Eight keyboard interrupt (KBI) pins with selectable polarity with KBI interrupt
• IRQ: External pin for wakeup from low-power modes
• System Protection
• Watchdog computer operating properly (COP) reset with option to run from dedicated 1 kHz internal clock source or bus clock
• Low-voltage detection with reset or interrupt; selectable trip points
• Illegal op code and illegal address detection with reset
• Flash block protection
• Development Support
• Single-wire background debug interface
• Breakpoint capability
• ICE debug module
• Three comparators
• Nine trigger modes
• Eight deep FIFO for storing change-of-flow addresses and event-only data
• supports both tag and force breakpoints
• Product Longevity Program
• This product is included in NXP product longevity program, with assured supply for a minimum of 15 years after launch