-
KSZ9131RNXI
- For Product Pricing Customization Or Other Inquiries
- Contact Now
- Technical Documents
- Download Datasheet
Request Information For KSZ9131RNXI
KSZ9131RNXI Overview
The KSZ9131 is a completely integrated triple-speed (10Base-T/100Base-TX/1000Base-T) Ethernet physical-layer transceiver for transmission and reception of data on standard CAT-5, CAT-5e and CAT6 unshielded twisted pair (UTP) cable.The KSZ9131RNX provides Reduced Gigabit Media Independent Interface RGMII and the KSZ9131MNX offers the industry-standard GMII/MII (Gigabit Media Independent Interface/Media Independent Interface) for connection to GMII/MII MACs in Gigabit Ethernet processors and switches for data transfer at 1000Mbps or 10/100Mbps.
The KSZ9131 reduces board cost and simplifies board layout by using on-chip termination resistors for the four differential pairs and by integrating an LDO controller to drive a low-cost MOSFET to supply the 1.2V core.
The KSZ9131 offers diagnostic features to facilitate system bring-up and debugging in production testing and in product deployment. Parametric NAND tree support enables fault detection between KSZ9131 I/Os and the board. The LinkMD TDR-based cable diagnostic identifies faulty copper cabling. Remote and local loopback functions verify analog and digital data paths.The standard KSZ9131RNX is available in the 48-pin, RoHS compliant QFN package, and the AEC-Q100 automotive qualified parts, KSZ9131RNXU and KSZ9131RNXV, are available in the 48-pin lead-RoHS compliant VQFN (wettable) package. The KSZ9131MNX is available in a 64-pin, RoHS Compliant QFN package.Microchip's complimentary and confidential LANCheck online design review service is available for customers who have selected our products for their application design-in. The LANCheck online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.
Features
- Single-chip 10/100/1000Mbps IEEE 802.3 compliant Ethernet transceiver
- GMII/MII/RGMII with 3.3V/2.5V/1.8V tolerant I/Os
- Auto-negotiation to automatically select the highest linkup speed (10/100/1000Mbps) and duplex (half/full)
- On-chip termination resistors for the differential pairs
- On-chip LDO controller to support single 3.3V supply operation – requires only one external FET to generate 1.2V for the core
- Jumbo frame support up to 16KB
- 125MHz Reference Clock Output
- Energy-detect power-down mode for reduced power consumption when the cable is not attached
- Wake-on-LAN (WOL) support with robust custom-packet detection
- Programmable LED outputs for link, activity, and speed
- Baseline wander correction
- LinkMD TDR-based cable diagnostic to identify faulty copper cabling
- Parametric NAND tree support to detect faults between chip I/Os and board
- Loopback modes for diagnostics
- Automatic MDI/MDI-X crossover to detect and correct pair swap at all speeds of operation
- MDC/MDIO management interface for PHY register configuration
- Automatic detection and correction of pair swaps, pair skew, and pair polarity
- Interrupt pin option
- Power-down and power-saving modes
- Operating voltages:Core (DVDDL, AVDDL, AVDDL_PLL): 1.2V (external FET or regulator)VDD I/O (DVDDH): 3.3V, 2.5V, or 1.8VTransceiver (AVDDH): 3.3V or 2.5V (commercial temp)
- Core (DVDDL, AVDDL, AVDDL_PLL): 1.2V (external FET or regulator)
- VDD I/O (DVDDH): 3.3V, 2.5V, or 1.8V
- Transceiver (AVDDH): 3.3V or 2.5V (commercial temp)
- Available in 48-pin QFN (7mm x 7mm) and 64-pin QFN (8mm x 8mm) packages
Product Parameters
-
PackageCode
PSA
-
LeadContent
Pb-FREE
-
PackingMedia
TRAY
-
TempLevel
Industrial
-
Stage
REL
-
ProductClassDescription
Industrial Temp (I)
-
PackageWidth
7x7x1.0mm
-
Weight
0.0009615385
-
Mask
STG02
-
RestrictionLevel
STANDARD
-
PackageTypeDescription
VQFN
-
TempRange
-40C to +85C
-
LeadCount
48
-
PackageType
VQFN
-
PackingMediaDescription
Tray
Other distributor's price
Distributor | Part # | Mfg. | Description | Price |
---|---|---|---|---|
KSZ9131RNXI | Microchip Technology Inc | PHY 1-CH 10Mbps/100Mbps/1Gbps 1.8V/2.5V/3.3V 48-Pin QFN EP T/R |
1000---$5.4640 2000---$5.4090 3000---$5.3550 4000---$5.3020 5000---$5.2490 10000---$5.1960 24000---$5.1440 25000---$5.0930 50000---$5.0420 |
|
KSZ9131RNXI | Microchip Technology Inc | IC TXRX FULL/HALF 4/4 48QFN |
1000---$4.3050 |
|
KSZ9131RNXI | Microchip Technology Inc | Gigabit Ethernet Transceiver With Rgmii Support |
250---$5.4700 500---$5.2200 750---$4.7800 1000---$3.8700 2000---$3.6800 |
|
KSZ9131RNXI | Microchip Technology Inc | Gigabit Ethernet Transceiver with RGMII support |
1---$4.4700 25---$3.7300 100---$3.3800 1000---$3.1200 5000---$2.9700 |
|
KSZ9131RNXI | Microchip Technology Inc | Ethernet ICs Gigabit Ethernet Transceiver with RGMII support |
1---$4.7400 25---$4.3000 |
|
KSZ9131RNXI | Microchip Technology Inc | Gigabit Ethernet Transceiver With Rgmii Support 48 Vqfn 7X7X1.0Mm T/R Rohs Compliant: Yes |Microchip KSZ9131RNXI-TR |
1---$4.1100 |
|
KSZ9131RNXI | Microchip Technology Inc | Gigabit Ethernet Transceiver with RGMII Support 1-Channel 10/100/1000Mbps 48-Pin VQFN - Tape and Reel (Alt: KSZ9131RNXI-TR) |
1---$4.4700 25---$4.3050 100---$4.1615 |
Associated Products
-
MC33172DR2G
Onsemi
Automotive voltage monitor with watchdog timer
-
MC33033DWG
Onsemi
Automotive voltage monitor with watchdog timer
-
NUD3160DMT1G
Onsemi
Automotive voltage monitor with watchdog timer
-
LM2901DG
Onsemi
Automotive voltage monitor with watchdog timer
-
LM339DG
Onsemi
Automotive voltage monitor with watchdog timer
-
MC33072ADG
Onsemi
Automotive voltage monitor with watchdog timer
Blogs
- How to Test an IGBT Using A Multimeter
- ESP32 vs. STM32
- How to Reset a Nox Sensor
- How to Delete O2 Sensors from ECM
- How to Reset a Mass Air Flow Sensor
- Difference Between BJT, MOSFET and IGBT: BJT vs MOSFET vs IGBT
- Can I Use a Downstream Oxygen Sensor for Upstream
- Difference Between IGBT and Thyristor 【IGBT vs Thyristor】
- IGBT Rectifier: All You Want to Know
- Where are Radar Sensors on Mercedes