
-
L9963T
- For Product Pricing Customization Or Other Inquiries
- Contact Now
- Technical Documents
- Download Datasheet
Request Information For L9963T












L9963T Overview
L9963T is a general purpose SPI to isolated SPI transceiver intended to create a communication bridge between devices located into different voltage domains.
L9963T is able to transfer communication data incoming from a classical 4-wire based SPI interface to a 2-wire isolated interface (and viceversa).
The transceiver supports both transformer and capacitive isolation, since the isolated signal generated according to a proprietary protocol is suitable to be transmitted over both decoupling circuitries.
The device can be configured either as Slave or as Master of the SPI bus and supports any protocol made of SPI frames 8 to 64 bit long. The transceiver manages the transfer of the information without performing any protocol check.
SPI peripheral can work up to 10 MHz when configured as Slave. SPI clock frequency can be programmed among (250 kHz; 1 MHz; 4 MHz; 8 MHz) when configured as Master.
Isolated SPI peripheral features two different operating modes: slow @333 kbps and fast @2.66 Mbps.
The asynchronicity between the two sides is internally managed, allowing all possible configuration frequencies on both peripherals to be used in application.
L9963T features an internal queue of 3 slots for the frames received on the SPI port and a queue of 20 slots for the ones received on the isolated SPI side. This allows buffering and decoupling the two different clock domains.
The device is natively compatible with L9963 isolated SPI, allowing its usage in the BMS applications.
L9963T is compatible with both 3.3 V and 5 V logics.
Features
- AEC-Q100 qualified
- Full ISO26262 compliant, ASIL-D systems ready
- Compatible with both 3.3 V and 5 V logics
- Supports both XFMR and Capacitive isolation
- 10 MHz SPI peripheral for SPI Slave operation. Configurable SPI frequency (250 kHz to 8 MHz) for SPI Master operation
- 333 kbps and 2.66 Mbps Vertical InterFace (VIF) for isolated SPI communication
- Low standby current
Product Parameters
-
prmis_id
CP525359
-
item_name
L9963T
-
p_445
No
-
p_1387
0.4822
-
p_4418
1000
-
parent_id
PF267525
-
p_4906
false
-
p_5113
0
-
p_163
Active
Other distributor's price
Distributor | Part # | Mfg. | Description | Price |
---|---|---|---|---|
![]() |
L9963T | STMicroelectronics | Battery Monitoring Li-Ion Automotive 64-Pin TQFP EP T/R |
1000---$13.4390 |
![]() |
L9963T | STMicroelectronics | AUTOMOTIVE GENERAL PURPOSE SPI T |
2500---$3.7380 |
![]() |
L9963T | STMicroelectronics | Battery Management Automotive general purpose SPI to isolated SPI transceiver |
1---$7.0000 10---$6.2900 25---$5.9500 100---$5.1600 250---$4.8900 500---$4.3900 1000---$3.9900 2500---$3.9800 |
![]() |
L9963T | STMicroelectronics | Assp |Stmicroelectronics L9963-TR |
1---$15.9700 |
![]() |
L9963T | STMicroelectronics | Single Line Transceiver 2-Wire SPI 333 kbps 4.5V to 5.5V 16-Pin SOIC T/R - Tape and Reel (Alt: L9963T-TR) |
2500---$3.5398 5000---$3.4683 10000---$3.3968 15000---$3.3253 20000---$3.2538 25000---$3.1822 250000---$3.1107 |
Associated Products
-
TDA75610S-8ZX
ST
Automotive voltage monitor with watchdog timer
-
TLE88812TNAKSA1
infineon
Automotive voltage monitor with watchdog timer
-
L9177ATR
ST
Automotive voltage monitor with watchdog timer
-
TLE7241EXUMA2
infineon
Automotive voltage monitor with watchdog timer
-
L9788
ST
Automotive voltage monitor with watchdog timer
-
TLE6288RAUMA2
infineon
Automotive voltage monitor with watchdog timer
Blogs
- How to Reset a Mass Air Flow Sensor
- How to Test an IGBT Using A Multimeter
- How to Reset a Nox Sensor
- How to Test Crankshaft Sensor with Multimeter
- How to Delete O2 Sensors from ECM
- ESP32 vs. STM32
- Difference Between BJT, MOSFET and IGBT: BJT vs MOSFET vs IGBT
- IGBT Symbol Diagram, Characteristics, Circuit
- How to Reset a Coolant Temperature Sensor
- CMOS vs BSI Sensor