-
PCA82C250T/YM,118
- For Product Pricing Customization Or Other Inquiries
- Contact Now
- Technical Documents
- Download Datasheet
Request Information For PCA82C250T/YM,118
PCA82C250T/YM,118 Overview
The PCA82C250 is the interface between a CAN protocol controller and the physical bus. The device provides differential transmit capability to the bus and differential receive capability to the CAN controller.Features
- Fully compatible with the “
- ISO 11898
- High speed (up to 1 MBd)
- Bus lines protected against transients in an automotive environment
- Slope control to reduce Radio Frequency Interference (RFI)
- Differential receiver with wide common-mode range for high immunity against ElectroMagnetic Interference (EMI)
- Thermally protected
- Short-circuit proof to battery and ground
- Low-current Standby mode
- An unpowered node does not disturb the bus lines
- At least 110 nodes can be connected
Product Parameters
-
Recommended Orderable Part Number
PCA82C250T/YM,118
-
Low Power Modes
Standby Mode
-
CAN Channels
1
-
Supply Voltage [Min to Max] (V)
4.75 to 5.25
-
VIO Option Available
N
-
Supported standards
ISO-11898-2
-
MCU I/O Interface (V)
5.0
-
Data Rate [max] kbps
1000.0
-
Product Category
High-Speed CAN
-
Voltage on bus pins [Min-Max] (V)
-8 to 18
-
GPIO
8
-
Product Application
Industrial
Technical Documents
-
CAN controller interfaceDetails>>
-
SO8; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending, 518 or Y Ordering code (12NC) ending 518Details>>
-
PCA82C250/251 CAN TransceiverDetails>>
-
TJA1050 high speed CAN transceiverDetails>>
-
TJA1041/1041A high speed CAN transceiverDetails>>
Associated Products
-
TW8816-LB3-GR
Renesas
Automotive voltage monitor with watchdog timer
-
TW8816-LB3-GRS
Renesas
Automotive voltage monitor with watchdog timer
-
TW8834-TA2-CR
Renesas
Automotive voltage monitor with watchdog timer
-
TW8836-LB2-CE
Renesas
Automotive voltage monitor with watchdog timer
-
TW9910-LB2-GR
Renesas
Automotive voltage monitor with watchdog timer
-
TW9910-NB2-GR
Renesas
Automotive voltage monitor with watchdog timer
Blogs
- How to Reset a Mass Air Flow Sensor
- How to Test an IGBT Using A Multimeter
- How to Reset a Nox Sensor
- How to Delete O2 Sensors from ECM
- How to Test Crankshaft Sensor with Multimeter
- ESP32 vs. STM32
- Difference Between BJT, MOSFET and IGBT: BJT vs MOSFET vs IGBT
- IGBT Symbol Diagram, Characteristics, Circuit
- Difference Between IGBT and Thyristor 【IGBT vs Thyristor】
- Can I Use a Downstream Oxygen Sensor for Upstream