-
TMP411AQDGKRQ1
- For Product Pricing Customization Or Other Inquiries
- Contact Now
- Technical Documents
- Download Datasheet
Request Information For TMP411AQDGKRQ1
TMP411AQDGKRQ1 Overview
The TMP411-Q1 is a remote temperature sensor monitor with a built-in local temperature sensor. The remote temperature-sensor diode-connected transistors are typically low-cost, NPN- or PNP-type transistors or diodes that are an integral part of microcontrollers, microprocessors, or FPGAs.
Remote accuracy is ±1°C for multiple IC manufacturers, with no calibration needed. The two-wire serial interface accepts SMBus write byte, read byte, send byte, and receive byte commands to program the alarm thresholds and to read temperature data.
Features that are included in the TMP411-Q1 are: series resistance cancellation, programmable non-ideality factor, programmable resolution, programmable threshold limits, minimum and maximum temperature monitors, wide remote temperature measurement range (up to 150°C), diode fault detection, and temperature alert function.
The TMP411-Q1 is available in an VSSOP-8 package.
Features
- Qualified for Automotive Applications
- AEC-Q100 Qualified With the Following Results
- Device Temperature Grade 1: –40°C to 125°C
Ambient Operating Temperature Range - Device HBM ESD Classification Level H2
- Device CDM ESD Classification Level C4B
- Device Temperature Grade 1: –40°C to 125°C
- ±1°C Remote Diode Sensor
- ±1°C Local Temperature Sensor
- Programmable Non-Ideality Factor
- Series Resistance Cancellation
- Alert Function
- Programmable Resolution: 9 to 12 Bits
- Programmable Threshold Limits
- Two-Wire/SMBus Serial Interface
- Minimum and Maximum Temperature Monitors
- Multiple Interface Addresses
- ALERT/THERM2 Pin Configuration
- Diode Fault Detection
Product Parameters
-
genericPartNumber
TMP411-Q1
-
partDescription
Automotive Grade, Remote and Local Temperature Sensor with N-Factor and Series-R Correction
-
statusDescription
This product has been released to the market and is available for purchase. For some products, newer alternatives may be available.
-
packageQtyCarrier
2500|LARGE T&R
-
orderablePartNumber
TMP411AQDGKRQ1
-
statusDisplay
ACTIVE
-
packageQuantity
2500
-
packagePins
VSSOP (DGK)|8
Other distributor's price
Distributor | Part # | Mfg. | Description | Price |
---|---|---|---|---|
TMP411AQDGKRQ1 | Texas Instruments | Temp Sensor Digital Serial (2-Wire, I2C, SMBus) Automotive 8-Pin VSSOP T/R |
2500---$0.9301 |
|
TMP411AQDGKRQ1 | Texas Instruments | SENSOR DIGITAL -40C-125C 8VSSOP |
1---$1.9400 10---$1.7470 25---$1.6484 100---$1.4044 250---$1.3186 500---$1.1538 1000---$0.9560 |
|
TMP411AQDGKRQ1 | Texas Instruments | Board Mount Temperature Sensors AC +/-1degC Remote & Local Temp sensor |
1---$2.3000 10---$1.8700 25---$1.5000 50---$1.3700 100---$1.2500 500---$0.9570 2500---$0.9560 |
Associated Products
-
MPXV5100GC6U
NXP
Automotive voltage monitor with watchdog timer
-
MMA6900KQ
NXP
Automotive voltage monitor with watchdog timer
-
MPXHZ6400AC6T1
NXP
Automotive voltage monitor with watchdog timer
-
MPX4115AP
NXP
Automotive voltage monitor with watchdog timer
-
MPX5050DP
NXP
Automotive voltage monitor with watchdog timer
-
MPXAZ6115AP
NXP
Automotive voltage monitor with watchdog timer
Blogs
- How to Reset a Mass Air Flow Sensor
- How to Test an IGBT Using A Multimeter
- How to Reset a Nox Sensor
- How to Delete O2 Sensors from ECM
- ESP32 vs. STM32
- How to Test Crankshaft Sensor with Multimeter
- Difference Between BJT, MOSFET and IGBT: BJT vs MOSFET vs IGBT
- Can I Use a Downstream Oxygen Sensor for Upstream
- Difference Between IGBT and Thyristor 【IGBT vs Thyristor】
- IGBT Symbol Diagram, Characteristics, Circuit